Efficient H2S Removal
Ultra S3 increases the rate and efficiency of the breakdown of Hydrogen Sulfide (H2S).
Safe H2S Removal
Ultra S3 Hydrogen Sulfide remover is classified as non-hazardous under the Toxic Substance Control Act of 1976 (TSCA).
Ultra S3 can be easily integrated with an existing Hydrogen Sulfide treatment infrastructure.
ULTRA S3 H2S REMOVAL SYSTEM
Ultra-S3 H2S remover is an oxidizing system that breaks down Hydrogen Sulfide (H2S). Ultra-S3 reduces H2S to acceptable levels, eliminating the smell of Hydrogen Sulfide and limiting H2S caused deterioration and corrosion.
Contact Us For More Information
For over a decade, Ultra-S3 has been used as a cost-effective and efficient Hydrogen Sulfide removal system when combined with hydrogen peroxide or other oxidizers. The S3 H2S removal system eliminates the odor associated with H2S and reduces the costs associated with the corrosion caused by Hydrogen Sulfide.
Ultra-S3, when combined with an oxidizer, is able to substantially reduce the amount of H2S to safe levels in less time than just using the oxidizer alone.
The Ultra-S3 H2S removal system is used worldwide to treat Hydrogen Sulfide in waste water treatment facilities, waste water retention ponds, landfills, chemical plants, paper mills, food processing plants, and sewage lines.
Ultra-S3 H2S Removal System
- Ultra-S3: How Hydrogen Sulfide Removal Works
- The Benefits of the Ultra-S3 H2S Removal System
- Requirements: Ultra-S3 H2S Remover
Ultra-S3 is combined with an oxidant (typically hydrogen peroxide (H202)) in the waste stream or target area containing the hydrogen sulfide gas (H2S) or other recalcitrant organic compounds.
The combination of Ultra-S3 with the oxidant produces hydroxyl radicals which break down the chemical bond of hydrogen sulfide. The Ultra-S3 oxidizing system breaks down these chemical bonds to non-detectable, safe levels much faster and more efficiently than just hydrogen peroxide alone.
Efficient Hydrogen Sulfide Removal
Through both testing and implementation, S3 has shown to have a significant effect on both the rate and overall efficiency in the breakdown of sulfide when used alongside hydrogen peroxide, as opposed to using hydrogen peroxide by itself.
Safe H2S Removal
Ultra-S3 and its chemical components have been classified as non-hazardous under the Toxic Substance Control Act of 1976 (TSCA). It’s also chemically engineered to target problem compounds without destroying environmentally beneficial microbes.
Easy to Implement
Ultra-S3 Hydrogen Sulfide removal treatment can be implemented within an existing H2S treatment infrastructure with minimal capital investment.
Hydrogen Sulfide causes corrosion and deterioration of facilities and infrastructure, the Ultra-S3 H2S Removal System prevents the costly damage of Hydrogen Sulfide.
Not Just for Hydrogen Sulfide Removal
In addition to H2S removal, Ultra-S3 can remove other recalcitrant organic compounds including benzene, methyl tert-butyl ether (MTBE), toluene, trichloroethylene, and many others.
Preparation for Delivery and Testing
- Identify pH of the polluted water. (Ideal pH range is between 7.2-8.4.)
- Identify flow rate (gallons per day).
- Identify concentration of pollutant (ppm).
- Identify desired concentration of pollutant after treatment (ppm). This number is typically 0 ppm.
Ultra-S3 Delivery Method for H2S Removal
- Ultra-S3 (available from UltraTech distributor)
- Hydrogen Peroxide or other oxidant
- Peristaltic pumping system
- Optional water-proof housing